6’ Precision Shaper
-
$10,000 USD obo
$10,000 For the Enclosed Shed
8 year old Precision Shaper CNC for sale in Portland, Oregon
This machine is in great running order, perfect for high volume wake surf manufacturing.
Cut boards with a 6' x 24" working area
Includes new, computer, and motherboard
Shed is fully insulated and wired for power (220 breaker)
Includes dust collector
This CNC machine can cut up to 3 boards per hour and is ready to ship today! Contact us for more information and pricing
18’ 3DM CNC
-
$55,000 USD obo
Built in Southern California, 3DM surfboard shaping machines are trusted by leading manufacturers like Channel Islands Surfboards and Marko Foam for consistent, high-performance production.
This 3-axis machine, built in 2022, has been lightly used (~800 boards) and is in excellent working condition. Built for speed and repeatability, it features a heavy-duty welded steel frame, HSD high-torque spindle, and delivers clean, accurate cuts across a full range of board designs.
Equipped with a bull-nose carbide burr cutter for precise shaping of channels, wings, foil decks, and fin boxes. The 18’ x 36” x 18” cutting area accommodates everything from shortboards to paddleboards.
Includes hotwire attachment for in-house EPS blank production - ideal for increasing throughput and reducing reliance on external suppliers.
Key Features:
Heavy-duty welded steel frame
HSD high-torque spindle
Auto-lubrication
5 cutters (2 standard, 2 long, 1 finbox/foil track)
Gast vacuum system with solid board hold-down
Motion controller with on-screen toolpaths
Integrated dust collection system
Hotwire attachment for EPS blanks
Originally over $110K new. Asking for $55,000 or best offer.
Includes setup support, consultation, starter files, and warranty.
Shipping available (flatbed in the lower 48 or international container).
12’ 3DM CNC
-
$45,000 USD obo
3 year old 3DM CNC for sale in St. Augustine, Florida
This machine is in great running order and has several add-on parts.
Cut boards with a 12' x 34" working area
New winCNC software, computer, and motherboard board
Includes Grizzly dust collector
Includes (2) air compressors for the machine
Comes with (2) totes full of extra parts and (5) additional cutting blades
This CNC machine can cut up to 2.5 boards per hour and is ready to ship today! Contact us for more information and pricing
14’ 3Emmegi CNC
-
$50,000 USD obo
2012 3Emmegi CNC for sale in San Juan, Puerto Rico
This machine has recently been upgraded with all new parts, work holdings, and vacuum suction
It is in strong working order, cuts board up to 14’
Includes duct collection system
Includes hundreds of pre-installed shapes
Can be shipped anywhere in the world
Outfitted for 380 volts, 110 power
For more details and pricing, please message us below!
12’ AkuShaper Pro
-
$30,000 USD obo
10-Year-Old AkuShaper PRO CNC Machine – For Sale in San Clemente, CA
Reliable and well-maintained surfboard shaping machine ready for its next chapter. Perfect for a growing operation or as a backup unit.
Key Features:
Cuts shortboards to longboards – up to 10'6"
3-axis motion system with smooth belt drive
Includes computer, monitor, and AkuShaper factory license
Vacuum hold-down system and dust collection hose included
Currently operational – can be demoed on-site
Crating and shipping assistance available
14’ 3 Emmegi CNC
-
$17,500 USD obo
2017 3Emmegi (Italy) CNC machine for sale in Aquitaine, France.
This CNC machine is a bull nose cutting blade machine, specially equipped to hand symmetrical rail cuts and heavy duty blank cutting. The machine is ready for immediate sale & delivery.
Machine size: 15' long x 4' wide x 9' tall
Ultra robust welded mechanical chassis
Equipped with a 2.2KW ELTE pin
CMZ engine servo
Pinion drive and Hiwin linear rails on all axes
For more details and pricing, please message us below!
15’ Kedis PRO
-
$32,000 USD
Brand new in Sao Paulo, Brazil.
Kedis have installed over 50 machines since 2012 and offer ongoing support. Kedis machines manufacture for big names like Channel Islands, Timmy Paterson, and Lost.
Cut any board with a huge working area - 15ft long and 38" wide.
Accurate cuts every time with a rigid carbon steel helical tracks and industrial linear guides.
Moves a lot of foam quickly with a powerful 4.2HP spindle and a 10" tungsten carbide disc cutter.
Rapid cuts with 4 fast and powerful servo motors (85kgf), and lightweight aluminium moving carriage.
Identical boards always with a 2KW centrifugal pump vacuum system, 4 suction cups, and a powerful alignment laser.
Can go in any factory because it only requires single-phase power!
Built-in industrial computer/controller with Mach 3 for ease-of-use.
You can get started straight away with this machine, because it comes with 100 EPS blanks from ST Blanks!
12’ APS3000
-
$20,000 USD obo
2020 APS3000 for sale in Durban, South Africa
4 year old machine in excellent working order.. Ready for immediate sale & delivery.
Machine cutting size: 10'3' x 32"
Includes custom dust collection apparatus for dust re-direction
Custom swivel system for extra strength work holding & calibration
Rapid change of blank and surfboard sizes. Change from 5' to 10'3' in seconds. Cut full rails, nose and tails.
Option to include blanks in the purchase of the machine
For more details and pricing, please message us below!
10’5 Precision Shaper
-
SOLD: $17,000 USD
2020 Precision Shaper CNC machine for sale in Philadelphia, PA, USA
Less than a 3 year old machine in excellent working order, less than 300 boards cut on current work holding. Includes a brand new CNC computer with less than 4 hours on it. Ready for immediate sale & delivery.
Machine cutting size: 10'5' x 32"
Dust collection system included
2 complimentary training hours included, training available through manufacturer
Typical change time avg. 60 seconds. Cut full rails, nose and tails.
Built with aircraft grade aluminum optimal for reduced vibrations
For more details and pricing, please message us below!
SOLD
18’ KM System
-
$23,000 USD obo
2013 KM System CNC machine for sale in Nantucket, Massachusetts
10 year old machine in good working order, less than 100 boards cut on current work holding. Includes a new laptop with less than 6 hours on it. Ready for immediate sale & delivery.
Machine cutting size: 18' x 36"+x 14"
Hot Wire and Vacuum pump Included
New Elti watercooled spindle and cooling unit with less than 20 hours on them.
New Italian bearing blocks on X axis installed at the same time as spindle.
Eight adjustable sliding supports and four suctions cups D90mm ensure the maintenance of any piece.
For more details and pricing, please message us below!
12’ Revolution CNC
-
$25,000 USD obo
2015 Revolution Shaping Machine for sale in San Francisco, CA, USA
This machine is in good working order and will easily perform pre-shapes within .5-1mm precision and repeatability tolerance.
Machine size: 4' x 14' / Cuts boards 12'6" x 40"
System is fully capable of cutting boards as is. It has sat in a self-contained 40' shipping container and the system has very low use with a total of 8-10 cuts performed over the 8 year span.
Blanks supported by vacuum hold down and attached wide support
Carbide cutting head
Dust collection system included
The 40' container is self-contained, wired with lighting and a shaping bay and can run on generator or hard wired at any location. Recommend purchasing the container with the machine for ease of transport.
10’ Shopbot PRS-Alpha
-
SOLD: $22,500 USD
2018 custom Shopbot-PRS Alpha for sale in Portsmouth, Rhode Island
Purchased brand new and has been safely housed in climate control storage since 2021.
Custom 3 axis machine with a cutting area of : 132” X / 32” Y / 18” Z
10’ board cutting size
Powerful 4HP Spindle
Option for vacuum hold down system with laser alignment (great for stringless EPS) or end clamps for Stringer tabs
Produces high quality cuts and has versatility to set up for other projects with the ability to cut a wide range of materials. Fair price point on a solid, well made machine.
SOLD
19’ Precision Shaper
-
SOLD: $40,000 USD
7 Year old, 19' Used Precision Shaper CNC machine for sale in Freeport, Texas
Custom 3-axis machine to mill 16' x 36" blanks
Stepper motors with XL package to manage X, Y, Z, A axis
Precision German square steel rails XYZ axis 20mm
Max velocity of 13,500 mm per minute
Anti-deflection guides
Cyclone dust collector included
This ready to run machine includes a dust collection system and brand new blade. Contact us for more information and pricing below!
SOLD
10’ 3DM
-
SOLD: $12,500 USD
10' 3DM CNC machine for sale in San Diego, California
Very powerful HSD spindle
High torque servos
10’ board cutting size (straight line measured on the deck)
The spindle is a 6HP HSD Spindle. It has mega torque and cuts everything from styrene to solid wood
The servos on the XYZ axis are likewise very stout
10’ and scan by digital probe
Solid machine with several tools for cutting everything from foam to solid wood.
This machine is priced to sell. Contact us for more information and pricing below!
SOLD
9’ Precision Shaper
-
SOLD: $20,000 USD
3 year old Precision Shaper CNC for sale in Martinas, California
This machine was purchased brand new and has been unused since 2021.
Cut boards with a 9' x 32" working area
Blanks supported by vacuum hold aparatus
Aircraft grade, low vibration aluminum
Tungsten carbide coated cutting head
Accuracy .5mm, Repeatability .125mm
This CNC machine can cut up to 3 boards per hour and is ready to ship today! Contact us for more information and pricing below!
SOLD
12’ AkuShaper PRO
-
Less than 2 years old, all the bells and whistles, located in California.
The photo shows this exceptional machine being installed, with a custom 2 stage dust collector.
Effortless to load blanks with its auto datum actuators.
Finish entire boards quickly with the "flip assist" option that's included.
Manufacture complex shapes with the advanced 4 axis router option.
Reliable continuous operation with 14 self-lubricating bearings.
Accurate and repeatable cuts with high qualilty closed loop servo motors.
The owner has offered his 30 years experience to help set up the machine at its new home!
SOLD
11’ AkuShaper PRO
-
SOLD: $45,000 USD
Less than 2 years old, all the bells and whistles, located in California.
The photo shows this exceptional machine being installed, with a custom 2 stage dust collector.
Effortless to load blanks with its auto datum actuators.
Finish entire boards quickly with the "flip assist" option that's included.
Manufacture complex shapes with the advanced 4 axis router option.
Reliable continuous operation with 14 self-lubricating bearings.
Accurate and repeatable cuts with high qualilty closed loop servo motors.
The owner has offered his 30 years experience to help set up the machine at its new home!
SOLD
12’ Surf Shaper PRO
-
SOLD: $75,000 USD
Less than 2 years old, all the bells and whistles, located in Portugal.
Effortless to load blanks with its auto datum actuators.
Finish entire boards quickly with the "flip assist" option that's included.
Manufacture complex shapes with the advanced 4 axis router option.
Reliable continuous operation with 14 self-lubricating bearings.
Accurate and repeatable cuts with high quality closed loop servo motors.
Includes Flip Assist and actuators
SOLD